FluidTecControls: Formulating Design into Automation. Trusted Quality for 20 Years. Creativity Meets Functionality.
Fluidteccontrols designs and builds hydraulic cylinders, power packs, presses, special purpose machines and quick die change systems — sized to your duty cycle and built for continuous production.
Solid-Barrel Cylinders
NFPA-interchangeable solid-barrel construction that is fully serviceable in the field — end caps unbolt for seal changes without cutting or re-welding, which keeps machine downtime to a repair, not a replacement.
| Bore diameter | 63 mm – 750 mm |
| Rod diameter | 40 mm – 700 mm |
| Stroke length | Up to 3000 mm |
| Rated working pressure | 320 bar (4,600 psi) |
| Duty cycle | Continuous, 24/7 rated |
| Position feedback | Optional magnetostrictive transducer |
Standard Power Packs
A proven pump-motor-reservoir arrangement configured against your flow and pressure requirement, with the valve bank and gauges you need for the circuit — nothing forced in, nothing left out.
| Motor power | 1 HP – 50 HP |
| Pump type | Gear / vane / Piston , Fixed Displacement |
| Flow rate | 4 – 300 LPM |
| Max operating pressure | 250 bar |
| Reservoir capacity | 30 – 1500 litres |
| Voltage / phase | 415V, 3-phase (custom on request) |
Closed / H-Frame Presses
An open H-shaped frame gives clear access from three sides for tooling and part handling, making it the standard choice for general pressing, straightening, bearing fitting and assembly work.
| Tonnage capacity | 10 TON – 630 TON |
| Stroke length | 150 mm – 1000 mm |
| Daylight opening | 300 mm – 1,500 mm |
| Table size (L × W) | 300 × 300 mm – 1,600 × 1600 mm |
| Ram speed (approach) | 80 – 300 mm/s |
| Ram speed (working) | 5 – 20 mm/s |
De-Coiler Support Arm SPM
Closed-loop force-displacement control presses bearings, bushings and shafts to an exact seating position every cycle, with an automatic reject on any part that falls outside your tolerance band.
| Application | Support Arm for De-Coiler |
| Force capacity | 5TON – 50TON |
| Cycle time | 8 – 30 seconds (per station) |
| Automation level | Semi-auto to fully automatic |
| Positioning accuracy | ± 1 mm |
| Control system | PLC + HMI, force-displacement monitor |
20+
Years engineering hydraulics
1,200+
Machines commissioned
350 bar
Max system pressure built
48 hr
Typical quote turnaround
Trusted by leading manufacturers
- Godrej Intralogistics
- Amalgamation Valeo Clutch
- Wheels India
- BS&B Safety Systems
- Godrej & Boyce
- Super Auto Forge
- MS Agarwal Foundries
- Polyhose India
- Devi Polymers
- Sundram Fasteners
- SS Engineers & Associate
- Sundaram Brake Linings
- Madras Radiators and Pressing
- Rane (Madras)
- Lucas-TVS
- Amalgamation Repco
- Steel Strips Wheels
- Pennar Industries
- Vasanthi Foundry
- Sivaramakrishna Forgings
- Rane Brake Lining
- Sona BLW Precision Forgings
- Metal Forms
- Sun Fab
- MM Forgings
- Liason Engineers
- Karpagam Engineers
- Sai Sheet Stampings
- Sree M.P.F. Industries
- Sharadaa Ceramics
- Exedy India
- MIL Industries
- Federal-Mogul Ignition Products
- Sakura Autoparts India
- Madras Hardtools
- Pallavaram Tanners Industrial Effluent Treatment
- Caparo Engineering India
- Fabrimech Engineers
- HL Mando Anand India
- R. Stahl
- Mecholight Components (Chengai)
- Saint-Gobain India
- Elta Tools & Dies
- Precision Equipments (Chennai)
Six product lines, one engineering team
From a single cylinder to a fully automated press line, every product is engineered against your drawing and duty cycle.
Built by engineers who also run the shop floor
We hold tolerances because we control every step, from raw material to the test certificate that ships with your machine.
In-house manufacturing
Machining, honing, chrome plating and assembly under one roof, so tolerances are held from raw bar to finished unit.
Engineering-led design
Every quote starts with your duty cycle and drawing, not a nearest-fit catalog part number.
Tested & certified
Pressure, leak and load testing on every unit, with test certificates shipped alongside the machine.
Built for continuous duty
Components sized for 24/7 production environments, not intermittent bench use.
From drawing to dispatch
Share your requirement
Send a drawing, duty cycle, or describe the process — no formal spec required to start the conversation.
Engineering & quote
Our team sizes the cylinder, pump or frame against your numbers and returns a configuration and quote, typically within 48 hours.
Build, test, deliver
Machined, assembled and pressure-tested in-house, with a test certificate shipped alongside every unit.
Deployed across heavy and precision manufacturing
Have a spec sheet or a problem to solve?
Send us your drawing, duty cycle or a description of the process — our engineering team will get back with a configuration and a quote.