C-Frame Presses
Open-front access for fast, repetitive part loading.
The open-front C-frame gives operators unrestricted access from three sides for rapid manual loading — the standard choice for high-frequency stamping, blanking and piercing operations.
Key features
- Open-front access for fast manual loading
- Precision-ground guide gibs for ram alignment
- Adjustable stroke and shut height
- Foot-pedal or two-hand safety actuation
Typical applications
- Stamping & blanking
- Piercing & notching
- Coining operations
- High-frequency component pressing
Specifications
Standard range shown below — every unit is configured to your exact drawing on request.
| Tonnage capacity | 10 TON – 250 TON |
| Stroke length | 200 mm – 630 mm |
| Daylight opening | 300 mm – 800 mm |
| Table size (L × W) | 300 × 300 mm – 1000 × 800 mm |
| Strokes per minute | Up to 10 spm |
| Motor power | 2 HP – 50 HP |
| Actuation | Foot switch / Two-hand safety control |
| Control system | Push-button / PLC-HMI optional |
Presses
More hydraulic presses
Trusted by leading manufacturers
Have a spec sheet or a problem to solve?
Send us your drawing, duty cycle or a description of the process — our engineering team will get back with a configuration and a quote.