Die Lifter
Replace T-slot bolting with one-touch hydraulic clamps.
Hydraulic clamps bolted to the existing bolster replace manual T-slot bolting entirely — the operator triggers all clamps simultaneously from a single control station instead of walking the press bed with a wrench.
Key features
- Simultaneous multi-clamp actuation from one station
- Retrofits onto existing press bolster T-slots
- Clamp-position sensors with HMI confirmation
- Interlocked with press control to prevent unclamped runs
Typical applications
- Stamping press die changeover
- Multi-die production presses
- High-mix, low-volume press shops
Specifications
Standard range shown below — every unit is configured to your exact drawing on request.
| Lifting capacity | 200 – 2000 kg per clamp |
| Width | 28 mm |
| Die Lifter per system | 2 Nos per Table |
| Stroke | 3 mm |
| Length | 200-2000 mm |
| Working Pressure | 140 BAR (2030 PSI) |
| Actuation | Hydraulic, single (Acting) control station |
| Position sensing | Pressure sensors + HMI status |
| Safety | Press-PLC interlock, clamp-confirm logic |
Quick Die Change
More quick die change systems
Trusted by leading manufacturers
Have a spec sheet or a problem to solve?
Send us your drawing, duty cycle or a description of the process — our engineering team will get back with a configuration and a quote.