Toggle Type Mould Clamp
Reliable clamping for demanding applications.
This Toggle-type clamp does not require a U-slot on the die shoe, it may be used in a wide range of applications. The base of the clamp is machined to fit the T-slot on the bolster. The flange-mount model clamp may be bolted onto the bolster plate or directly to the machine frame.
Key features
- Versatility: Eliminates the need for specific U-slots on the die shoe, allowing you to clamp completely flat surfaces or varied die heights.
- Compatibility: The machined base slides smoothly into standard machine T-slots for quick positioning.
- Flexible Mounting: Offers a flange-mount alternative so you can bolt it down permanently when a T-slot isn't available.
Typical applications
- To avoid die changeover delays in high-mix production lines
- Press lines with frequent die rotation
- Retrofit onto existing bolster plates
Specifications
Standard range shown below — every unit is configured to your exact drawing on request.
| Clamping Force | 1 - 25 TON |
| Stroke Range | 4 - 8 mm |
| Clamps per system | 4 – 12 (per bolster size) |
| Changeover time | Reduced to 2 – 3 minutes |
| Working Pressure | 250 BAR (3600 PSI) |
| Actuation | Hydraulic, single control station |
| Position sensing | Pressure sensors + HMI status |
| Safety | Press-PLC interlock, clamp-confirm logic |
Quick Die Change
More quick die change systems
Trusted by leading manufacturers
Have a spec sheet or a problem to solve?
Send us your drawing, duty cycle or a description of the process — our engineering team will get back with a configuration and a quote.