Hydraulic Die Clamp
Replace T-slot bolting with one-touch hydraulic clamps.
The clamp requires dedicated U-shaped slots integrated directly into the die shoe, while the bottom leg is specifically machined to slide securely into the bolster’s standard T-slots
Key features
- Simultaneous multi-clamp actuation from one station
- Retrofits onto existing press bolster T-slots
- Clamp-position sensors with HMI confirmation
- Interlocked with press control to prevent unclamped runs
Typical applications
- Stamping press die changeover
- Multi-die production presses
- High-mix, low-volume press shops
Specifications
Standard range shown below — every unit is configured to your exact drawing on request.
| Clamping force | 2 TON – 30 TON per clamp |
| Stroke Range | 4 - 8 mm |
| Clamps per system | 4 – 12 (per bolster size) |
| Changeover time | Reduced to 2 – 3 minutes |
| Working Pressure | 250 BAR (3600 PSI) |
| Actuation | Hydraulic, single control station |
| Position sensing | Pressure sensors + HMI status |
| Safety | Press-PLC interlock, clamp-confirm logic |
Quick Die Change
More quick die change systems
Trusted by leading manufacturers
Have a spec sheet or a problem to solve?
Send us your drawing, duty cycle or a description of the process — our engineering team will get back with a configuration and a quote.